Capa Electronic Options robots

Description	Photo	Référence
Soldering tip positioning correction mechanism		UCS-410Z-SET UCS-410SZ ( without controller )
Extended Controller - 2 Heat controller (N2 double heater & solder preheating) - Needle swing control function - Brush cleaner fct - 3 axes correction control - Counters for product qty, tip solder point, and heater "on" time.		UEC-01
Gaduater angle setter Make it easier to reproduce solder feed position		For soldering head UMC-086 UMC-086M-ANS For soldering head UMC-087 UMC-087M-ANS (In standard for this head)
Wire brush cleaner Useful for cleaning of foreign mater that could not be removed with a standard air-blow cleaner		UJC-216 cannot be used with UMC086 soldering head
Needle Swing Designed to work with brush cleaner		UMC-087-NS cannot be used with UMC086 soldering head
N2 Generator Does not require power supplies to operate		UNX-200 UNX-400
N2 tip cap		On left : 100RH-N2-CA On right : 100RH-N2-CA-YZ
Double heater Preheating effect on N2		HN-W100
Wire solder preheater Reduce heat shocking that results in solder balls and flux residue.		Reference depend of diameter SHN-10-05 = diam 0.5 mm SHN-10-06 = diam 0.6 mm SHN-10-08 = diam 0.8 mm SHN-10-10 = diam 1.0 mm SHN-10-12 = diam 1.2 mm
Lateral slide mechanism use to buffer contact between the head and workpiece during soldering		For soldering head UMC-086 UMC-086-RL For soldering head UMC-087 UMC-086-RL
Fume Extractor Extract flux fumes during soldering then filter and purifies the air through e HEPA filter
Fume extraction duct Available in several designs to suit the robot type		For 412R UAC-9DS-412R For 413R UAC-9DS-413R For 414R UAC-9DS-414R
Thermometer For mesuring tip temperature		UNISENSOR-701-A
PC Software